返回列表 回復 發帖

[分享] 解決 CuteFTP 不能登錄 SFTP 官方的解答

[分享] 解決 CuteFTP 不能登錄 SFTP 官方的解答

正確官方解答:更新至 update CuteFTP 8.1或更高(to CuteFTP 8.1 or greater)Frome: Knowledge Base
THE INFORMATION IN THIS ARTICLE APPLIES TO:
    * CuteFTP Professional (All Versions)
SYMPTOMS
When attempting a connection using the SFTP protocol, the following error is encountered:
    STATUS:>   Getting listing ""...
    STATUS:>   Initializing SFTP21 module...
    STATUS:>   Connecting to SFTP server... 192.168.20.135:22 (ip = 192.168.20.135)...
    ERROR:>    The file being transferred in ASCII mode appears to be a Binary file. Proceed anyway?
    ERROR:>    Can't connect to 192.168.20.135:22. SFTP21 error = #0.
    STATUS:>   SFTP21 connection closed.

CAUSE
This error is the result of a timeout of an SFTP operation.  The first line of error text is irrelevant and should be disregarded.  There are two known possible causes for this error:

   1. This problem may be caused by a misconfigured firewall.

   2. This is a known problem when using CuteFTP versions 8.0.0 through 8.0.7 and attempting an SFTP connection to a server computer running Titan FTP Server.  This issue was fixed in CuteFTP 8.1.

RESOLUTION
   1. Check the firewall settings and ensure that port 22 is open and enabled for SFTP transfers.

   2. If you are connecting with a server computer running Titan FTP Server, update to CuteFTP 8.1 or greater.
訪客無法瀏覽此圖片或連結,請先註冊或登入會員
*** CuteFTP 8.0 - build May 31 2007 ***
狀態:>[2007-9-26 上午 15:19:14] 正在獲取列表「」...
狀態:>[2007-9-26 上午 15:19:14] 正在初始化 SFTP21 模塊...
狀態:>[2007-9-26 上午 15:19:14] 正在連接到 SFTP 服務器... 61.135.122.222:2008 (ip = 61.135.122.222)...
錯誤:>[2007-9-26 上午 15:19:44] 以 ASCII 模式傳輸的文件看起來是一個二進制文件。是否仍要繼續?
錯誤:>[2007-9-26 上午 15:19:44] 無法連接到 61.135.122.222:2008。SFTP21 錯誤 = #0。
狀態:>[2007-9-26 上午 15:19:44] SFTP21 連接已關閉。
最近經常連不上某服務器的sftp服務器,cuteftp報錯如上
我已經快瘋了,查了好多資料都不知道原因
它要一直不能上還好,但是它是 20%的時候能上  80%的時候上不去.困惑啊
還請高人指點  謝謝了
  某個帳號突然無法使用 sftp 連線登入,(可用ssh2登入)
  其它帳號都正常

  使用 FileZilla 看到的錯誤訊息是
    回應:  Fatal: Out of memory!

  使用 CuteFTP 7.1 看到的錯誤訊息是
    ERROR:> The file being transferred in ASCII mode appears to be a Binary
  file. Proceed anyway?
    ERROR:> Can't connect to xxx.xxx.xxx.xxx:22. SFTP21 error = #0.

  也有人問一樣的問題,可是沒看到解決方法

  請教各位,這有可能是什麼問題呢?
用google查詢
  訪客無法瀏覽此圖片或連結,請先註冊或登入會員
  和
  訪客無法瀏覽此圖片或連結,請先註冊或登入會員
  得到討論
Hi! I'm using CuteFtp Pro 7.0 to connect to a Linux server (Red Hat Linux 3.2.3) via SFTP. This was working fine, but even without any configuration change, from a few month ago I receive this message:

        *** CuteFTP 7.0 - build Mar 10 2005 ***

STATUS:>      [15/07/2006 11:15:13] Getting listing "/log/archive/PROD"...
STATUS:>      [15/07/2006 11:15:13] Initializing SFTP21 module...
STATUS:>      [15/07/2006 11:15:48] Resolving host name zv2005...
STATUS:>      [15/07/2006 11:15:53] Host name zv2005 resolved: ip = 192.168.0.250.
STATUS:>      [15/07/2006 11:15:53] Connecting to SFTP server zv2005:22 (ip = 192.168.0.250)...
        Allowed encryption method(s) by user:
        3des-cbc
        arcfour
        cast128-cbc
        twofish-cbc
        blowfish-cbc
        ----------------------------
ERROR:>       [15/07/2006 11:16:23] The file being transferred in ASCII mode appears to be a Binary file. Proceed anyway?
ERROR:>       [15/07/2006 11:16:23] Can't connect to zv2005:22. SFTP21 error = #0.
STATUS:>      [15/07/2006 11:16:23] SFTP21 connection closed.

I searched this forum and tried to change options (pasv / no pasv, more seconds in "connection timeout", etc.), but nothing works. Any idea? At least where to look.

Regards,
SB.
Hello
Whenever I try to connect to this site I get the following error:
*** CuteFTP 6.0 - build May 24 2004 ***
STATUS:> Getting listing ""...
STATUS:> Initializing SFTP21 module...
STATUS:> Connecting to SFTP server 203.144.217.30:22 (ip = 203.144.217.30)...
ERROR:> The file being transferred in ASCII mode appears to be a Binary file. Proceed anyway?
ERROR:> Can't connect to 203.144.217.30:22. SFTP21 error = #0.
STATUS:> SFTP21 connection closed.

Can any one assist on this error?
Taha
返回列表